a little help with choosing the modules

Design Concepts
1

Hi everyboy, I want to make a MidiBox64 but no a full one…I’m thinking about using this modules..

CORE, 2xAIN, DIN, DOUT, LCD…

It’ll be ok with this??, do you recommend to add another module??..

With This module configuration I will get a 64Pots (rotary and fathers) and 32 Buttons with 32 Leds and a LCD Display…It’s that correct??..

Sorry for asking this simple question, but i’m not so good at english and i want to check if what I undestand reading the guides it’s correct…

Thanks…

2

Hi nacho,

welcome to the uCApps Forum! (Posts: 1 :))

…is that correct??

Yes I think so.

do you recommend to add another module??..

…the LTC (LED/Thru/COM) module is useful if you have a need for a 2nd Midi-out and/or a Midi-thru port - and sometimes it is helpful to have information about the midi-in/out-activity (info LED’s)…

MB64 Buttons // with one Dinx4 module you’ll have:

4 buttons for MB64 navigation

4 function buttons (F1 - F4) // they (can) act like normal buttons with the MB64 firmware but they have special funktions with the MB64SEQ firmware…

24 normal buttons (free assignable)

Good Luck!

  • Lemonhorse

// BTW - I have a lot of fun with my nearly finished 3rd MidiBox64  ;D

// visual notes: http://www.subfrequenz.net/techlog/mb64nr3.htm  

3

So that’s where you’ve been eh mr horse :wink:

Greetings …3 x boxes …that aughta get yo to full member status eh  ;D

Ian

4

Lemonhorse, this MB 64 #3 rocks :slight_smile:

5

:wink: ye nice work lemon!

6

Thanks for your feedback chaps (what a community ;D)!

…and again and again: THANK YOU TK!

With YOUR PROJECT you transform a piece of utopia in to a real “world-wide-web” fact.

  • Lemonhorse