a dial instead of the toggles

Parts Questions
1

is is possible to use a dial-selector with 16 positions instead of the 4 toggles, in order to select a bank - i think it more convenient using a dial/selector.

(talkin bout MidiBox8)

2

is is possible to use a dial-selector with 16 positions instead of the 4 toggles, in order to select a bank - i think it more convenient using a dial/selector.

(talkin bout MidiBox8)

3

No, but there are special hex-switch-dials available which are working fine. They have 16 positions, 1 input, 4 outputs.

Best Regards, Thorsten.

1 Like
4

No, but there are special hex-switch-dials available which are working fine. They have 16 positions, 1 input, 4 outputs.

Best Regards, Thorsten.

1 Like
5

Or instead you can use the BB firmware with 2 buttons instead of 4 as Thorsten suggest and get the best compatibillity with logic and cubase. If you search  in the troubleshouting you will find a post from me on that matter

Mind you that I bought an hex coding dial but the 2 buttons are far better in terms of usabillity

here is the link

http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=concepts;action=display;num=1036351381

1 Like
6

Or instead you can use the BB firmware with 2 buttons instead of 4 as Thorsten suggest and get the best compatibillity with logic and cubase. If you search  in the troubleshouting you will find a post from me on that matter

Mind you that I bought an hex coding dial but the 2 buttons are far better in terms of usabillity

here is the link

http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=concepts;action=display;num=1036351381