Hi ,
After talking to the first builder of Traktorizer i started my own build 
Here i will post pictures of the build as soon i progress , so far I etched my PCB’s and done some soldering as well as programming the PIC and see it working in MIOS
See you soon , Mihai .
Today i finished the board .
I hit the first problem , I connected one Nokia3310 LCD useing this http://www.ucapps.de/mbhp/mbhp_lcd_pcd8544_single_mios8.pdf diagram , I loaded MIOS and got the Operation System MIOS8 from MIOS Studio but nothing is displayed on the LCD .
I then loaded Traktorizer firmware .. same .. nothing is displayed . I tryed connecting the LCD to S1 pin .. nothing .
Also after loading traktorizer firmware i see a lot of activity in MIOS studio on the MIDI IN screen , is this normal ?
Is there any way to test the LCD’s ? I verifyed all the soldering and connections to the core .
Thanks !
Today i finished the board .
I hit the first problem , I connected one Nokia3310 LCD useing this http://www.ucapps.de/mbhp/mbhp_lcd_pcd8544_single_mios8.pdf diagram , I loaded MIOS and got the Operation System MIOS8 from MIOS Studio but nothing is displayed on the LCD .
I then loaded Traktorizer firmware .. same .. nothing is displayed . I tryed connecting the LCD to S1 pin .. nothing .
Also after loading traktorizer firmware i see a lot of activity in MIOS studio on the MIDI IN screen , is this normal ?
Is there any way to test the LCD’s ? I verifyed all the soldering and connections to the core .
Thanks !
Hi
here a quote from my homepage (latest Page updates) -> http://mte.bplaced.net/LatestPageUpdates.htm
# 24.07.2008 Traktorizer goes to Version V4.01(Beta)…LCD-Function completely removed…
Regards and sorry for the long delay
MTE
I’ve got loads of those old baystack switches, never though of reusing the cases though
Phil
They are very good , solid cases .
Before I tryed to use a Cisco 2950 1U case but it’s to small and the top is much more flexible than the Nortel case . I managed to get the SMPS from the Cisco , it’s small and provide 12+ and 5+ the Nortel SMPS is too big ( triple size ) .
I’am working in telecom industry and have a lot of discarded networking devices , they make very good cases ( and SMPS’s ) for DIY projects
I will post photos as soon i progress .
Mihai .
Why did you removed the LCD’s ?
The LCD-Function was just a try for a gimmick, but the programming was too hard for me…Im not a programming genius :drool:
Best Regards
